Cutting boards made from Afrormosia is a stunning and useful addition to any kitchen. To ensure their performance and longevity, they must be properly maintained and cared for, just like any other cutting board. We'll walk you through the process of taking care of your Afrormosia cutting board in detail in this blog, including how to wash, oil, and store it. You can keep your cutting board looking and performing like new for many years by following these easy suggestions.
Step 1: Clean your cutting board
Cleaning your Afrormosia cutting board thoroughly after each user is the first step in maintaining it. To clean the board's surface, use warm water and a little dish soap. Remove any food residue or stains by giving the surface a gentle scrub with a sponge or brush with soft bristles. Rinse well with water, then pat dry with a fresh towel.
Step 2: Sanitize your cutting board
It is essential to routinely sterilize your Afrormosia cutting board to make it free of bacteria and other hazardous organisms. This can be done by combining bleach and water, or one part white vinegar and four parts water. Using a clean cloth or sponge, apply the solution to the cutting board's surface and allow it to sit for a bit. After thorough rinsing with water, gently dry with a clean towel.
Step 3: Grease your cutting board
One of the most important maintenance steps is to regularly oil your Afrormosia cutting board. The board's surface can be oiled to prevent moisture damage and long-term cracking or warping. Use a food-grade oil, such as mineral oil or beeswax, to coat the board's surface. With a clean towel, generously apply the oil, being careful to cover the whole surface of the board. Let the oil sit for a few hours or overnight, if possible, before wiping any extra with a clean towel.
Step 4: Properly store your cutting board
When not in use, it's crucial to store your Afrormosia cutting board carefully to avoid cracking or warping. Never store it standing up on its edge and always keep it in a dry place away from heat sources and direct sunshine. Instead, lay it flat or vertically hang it to let air flow around it.
Step 5: Resurface your cutting board
Your Afrormosia cutting board may eventually develop scratches or stains as a result of frequent use. If this occurs, you can resurface the board to bring back its attractiveness and usability. Sand the board's surface with fine-grit sandpaper, being cautious not to remove too much wood. After sanding the surface, oil the board, as usual, to keep moisture out.
You may maintain your Afrormosia cutting board's appearance and functionality for many years by following these easy instructions. Your cutting board may become a stunning and useful kitchen centerpiece with the right upkeep and care.
If you need a cutting board, Afrormosia cutting board makes a great choice.
Comments