If you are going to be using 904L wires for welding, you have to understand how to select the product that will be most beneficial to you. This article will go over some important topics including what to look for in a wire and the different types of metals that are commonly used in welding.
ER70S-6
Among the various stainless steels available, the 904L wire has been designed for the harshest of conditions. It has a high content of nickel and molybdenum but is still a comparatively low-carbon alloy. For this reason, it offers good resistance to pit and gap corrosion and stress corrosion cracking in chloride solutions.
It has been used in a variety of applications, from power plant flue gas desulphurization devices to sulphuric acid storage tanks. It also shows up in petrochemical equipment and scrubbers in organic acid treatment systems. In short, it's a material that is tough to beat for most industrial uses. The alloy also has a number of other interesting attributes, including good processability and decent resistance to stress corrosion cracking.
Although it can be difficult to select a quality product, a bit of research will reveal several options that are right for the job. A good place to start is Metallica, which stocks a wide selection of SS904L in different grades. We'll help you choose the one that best suits your needs.
While the 904L alloy is a workhorse, it does come at a price. That price can vary depending on location and wearer. It's also hard to beat a 316L stainless steel for continuous moisture exposure, but it does carry some drawbacks.
Welding 904L Wires
Finding the right 904L Wires for welding can be difficult. The American Welding Society (AWS) offers multiple classifications to help you choose a wire based on the required mechanical properties.
Depending on the application, a solid wire can be a good option. Solid wires offer low spatter levels on clean base materials, but can also be a poor choice for welding metals that are contaminated or have corrosion problems. A good alternative to solid wires is a gas metal arc welder (also known as MIG).
For general fabrication and welding applications, ER70S-6 solid wire is often used. This wire is ideal for smooth wire feeding and good weld bead creation. It also has a higher manganese content. However, this wire generates silicon island deposits on the surface of the weld.
To avoid these undesirable phases, it is important to follow the manufacturer's recommendations for wire feed rate, cooling, and interpass temperature. These parameters affect the strength of the weld, its quality, and the amount of post-weld cleanup needed.
For more information visit India's leading 904L Wires Exporter
Comments