If your Cricut Explore Air machine is not able to cut all the way to your material or if it is only scoring the material, then this blog is for you. These types of issues can arise after prolonged use of the Cricut machine. Fortunately, there are methods to solve them. And in this blog, we’ll discuss them in detail. So, without further ado, let’s begin.
How To Solve Cricut Explore Air 2 Not Cutting Issue
- Ensure that the selected material setting in the Design Space or on your Smart Set Dial is the same as your material. In the Cricut Explore models with a Smart Set Dial, if your dial is fixed to Custom, please make sure that the Custom Materials list is already selected.
- After that, open Clamp B and then remove the blade holder from your Cricut Machine. Also, ensure that you’re using a Cricut brand blade. Always check the blade holder and remove all the dirt that may have accumulated in the holder. Once you have cleaned the holder, remove all the dirt and waste that might have accumulated on the sides of the holder. If the Cricut machine still didn’t cut after the cleaning, you can proceed to the next step, i.e., step 3.
- Now increase the pressure for your material by changing the settings by 2-4 by opening the Manage Custom Materials. You might have to change the pressure settings 2 to 3 times by increments of 2 to 4 to experience a modification in the cutting result.
- You can try cutting another type of material like printer paper or using any other appropriate setting for the material. By doing this, if you see the same result, then there might be a problem with the original material you’re trying to cut.
- You should attempt to Restore the blade you’re using with a new Cricut blade, as the blades do become dull with usage, and it requires replacement over time with a new strap and sharp blade, which mostly resolves the issues
- If your problem still exists, even after completing all the steps, contact Member Care for assistance.
How To Solve My Cricut Only Loading But Not Cutting Problem?
Push the unload mat button on your Cricut machine, and then push the same button again. The Cricut machine expects that the cutting mat is already inserted in the Cricut machine. After that, push the reset to wipe off all the commands and then again push the Load Mat button and use a different cartridge.
Things To Keep In Mind While Fixing The Cricut Explore Air 2 Not Cutting Error
You have to make sure that you use only a Cricut brand blade. And after that, you have to examine the blade housing and the blade to remove any scrap that might have gotten stuck to the blade or might have entered into the blade housing. Also, ensure to reinsert the housing back into your Cricut machine properly. After cleaning, you’re all ready to perform the test cut.
Conclusion
In this blog, we have explained why My Cricut Explore Air Won’t Cut. We hope we have resolved your issues; if you have any doubts left, please refer to our Frequently Asked Questions.
Frequently Asked Questions
How Do I Reset A Cricut Explore Air Machine?
Press and hold the button above and below the Menu button and power it on simultaneously. Keep holding them until you see a rainbow screen appearing. After that, follow the on-screen instructions to change the screen and finish the reset process.
What Is The Process To Calibrate In Cricut Explore Air Machine?
To calibrate in Cricut Explore Air, you have to sign in to the Cricut Design Space firstly iOS and click on the Account menu (symbol of a person on the upper left corner of the screen). After that, click on “Print Then Cut Calibration.” After clicking, the Calibration Window will appear, and your first will be to print the calibration sheet on the printer you’re using.
How Many Times Do We Need To Replace The Cricut Blades?
It is recommended to change your Cricut blades every 2 months if you’re having average use of the Cricut machine. But if you’re using your Cricut machine more often or regularly, you will have to change your blades every 6 months.
Source :- https://informationtechnologyhub.wordpress.com/2022/11/08/my-cricut-explore-air-2-wont-cut-solved/
Comments