Can’t figure out how to add a Canon printer to Mac? Don’t worry! In this post, we will show you how to add a Canon printer to your Mac computer via a wired or wireless network.
Canon produces quality printer equipment, including steppers, cameras, photocopiers, computers, camcorders, and peripherals. The company is headquartered in Japan and is ruling the market. Besides this, Canon has gained top-notch experience with many years of experience handling printing equipment and services. Below are the best ways to connect a Canon printer to your Mac computer.
How To Add a Canon Printer To Your Mac?
How you connect a Canon printer to your Mac depends on your Canon printer. If the Canon printer is of the latest model, it will support AirPrint, so you can set up and print in moments. If there is no AirPrint, you can use the Canon printer drivers on your Mac system and download them from Canon’s official website. Also, if the Canon printer has an integrated display, you need to connect it to Wi-Fi.
When the printer uses WPS mode, you’ll need to check the router’s documentation for details on how to add a WPS printer. Follow the steps provided by Apple when the router is on the MAC AirPort base station.
- Launch the AirPort Utility in your Application folder’s utilities folder.
- Select the base station in AirPort Utility and then enter the base station’s password if asked.
- Select “Base Station” > Add WPS printer from the Menu bar.
- Then select “First try” or “PIN” to allow the type of WPS connection.
- Click on the “Continue” button. If “The first attempt” has been selected, press the WPS button on your printer.
- Then, click on done when you see the MAC address of the printer in the AirPort Utility.
- After that, you have to stop using AirPort.
- Then, visit “System Preferences” > “Printers & Scanners” > click the “+” button.
- Keep your Default tab selected, and then the Mac will search for your printer to connect with the Wi-Fi network.
- Click on your Canon printer from the given list.
- At last, you need to tap on “Add” now.
Connecting a Canon printer to your Mac system was the easiest method. However, if you face any issue in the middle of the procedure, you must take an expert’s guide.
How To Connect a Canon Printer To a Wireless Network?
Follow the instructions in the section below to connect the Canon printer to a wireless network:
- As your initial step, you need to turn on your Canon printer.
- After that, make sure that your WPS button is present.
- Also, ensure that your network has enabled WPA or WPA2 security protocol.
- Then, tap the Wi-Fi button and hold it until the lamp blinks.
- The light in the Wi-Fi lamp must blink blue. When it happens, immediately go to the router and click on the WPS button.
- Ensure to press the button for 2 minutes. Otherwise, the connection will be disturbed.
- When the Wi-Fi light blinks, the printer looks for the available networks.
- After the Wi-Fi connects to a wireless router, the power lamp and Wi-Fi lamp will blink.
- Wait for a while for the connection to be completed. Once the connection is set up, the Wi-Fi will stop blinking.
- Then, you need to download the printer drivers from Canon’s official website.
- After that, install the driver setup by following the on-screen prompts.
- Once the setup is complete, you can use your printer.
- Finally, your Mac system is connected to the Canon printer.
How Can You Connect a Canon Printer To Your Mac Via Wired Network?
Follow the procedures below to connect a Canon printer to your Mac system with a wired connection:
- In the first step, switch on your Canon printer.
- Go to Canon’s official website and download the Canon printer drivers.
- Also, follow the on-screen instructions while downloading the drivers.
- Next, connect the printer’s USB cable to your Mac and the printer.
- After the driver installation completes, click on the “Apple” menu and select “System Preferences.”
- Click and open the “Printers and scanners” option.
- Then, add your Canon printer by clicking on the “+” option.
- Select the printer model from the available printers and click “Add.”
- Follow the installation process. The printer setup is now finished, and you can take a demo print to check whether it’s really connected or not.
How Do I Connect a Canon Printer To My Mac Via Bluetooth?
In order to connect a Canon printer to your Mac system via wireless Bluetooth, perform the directions given below:
- First of all, you will need to turn on your Canon printer.
- After that, open the “Printers & Scanners” section.
- Now, click the “+” button and then the Default tab.
- Wait until the list pop-ups.
- Select your Canon printer and click on the “Add” button.
Conclusion
We hope that our guide on how to add a Canon printer to Mac can help you. You can connect to it either through a wired or wireless network. However, the process may differ according to your Canon printer model. So, reading the manual to know about the settings is always important. After that, follow the given instructions.
Visit Site – ij.start.canon
Source :- https://setupijprinter.com/how-to-add-a-canon-printer-to-your-mac/
Comments