Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Wire, where chlorine additives would be an alternative. Nickel 200 Coil Wire is a Nickel based alloy containing 47.5 % Nickel, 22 % Chromium and 18.5 % Iron, with small amounts of Cobalt, Molybdenum and Tungsten.
All hot – or cold – worked parts of Nickel 200 Wire should be annealed and rapidly cooled in order to restore the best balance of properties. Carbide tools in Nickel 200 Wire should have smaller angles than high – speed tools and operating speeds can be higher. After 100 hours in petroleum coke, Nickel 200 is completely penetrated by carburization; whereas its specimens showed no carburization at all.
Useful Properties for Aircraft and Furnace Parts, Nickel 200 Wire is recommended especially for use in furnace applications. Alloy 200 Wire has unusual resistance to oxidizing, reducing, and neutral atmospheres, where work hardening occurs whenever a tool makes a cut. Its uncommon resistance to oxidation, combined with exceptional heat resistance and fabricability, make Alloy 200 a widely sought – after blend in a number of industries.
Thoroughly clean work piece after machining Alloy 200 Coil Wire, is to prevent surface contamination during subsequent heat treating. Because of the low thermal conductivity in Alloy 200 Wire, heat build – up is a problem, and therefore, correct coolant application is necessary.
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
Read More: Nickel Alloy 200 Wire Manufacturer in India
Comments