The Monel 400 Pipe allows the gas to be transported to the different appliances that consume it and in many cases also the hot and cold water.
The pipes allow the transport of various liquids and gases of different temperatures. In this guide you will learn how to use and keep copper pipes in good condition.
Where to use pipes?
Monel 400 Pipe Fittings are commonly used in water, gas, steam, lubricant installations and various industrial and residential applications outdoors, embedded or buried. In the conduction of flammable fluids it must be installed in plain sight.
Use tips
Remember before any job (water or gas):
Verify piping layout and possible contacts with other elements (iron, pipes, specialties, Hastelloy C276 Plate, others).
Avoid using electric tools in the presence of gas.
Finished the works, to control the quality and that the unions are hermetic.
Security advice
It is preferable that the installation of Hastelloy C276 Pipe Fittings be carried out by a technician authorized by the competent authority, for tasks related to gas or any other toxic or flammable fluid.
For any of the Inconel 600 Plate work you want to do, it is necessary to cut the supply of the transported fluid to avoid accidents.
System components and bonding techniques of Inconel 718 Round Bar may only be designed, developed, installed and operated as described in the manufacturer's specification manual and as regulated by official standards.
In case of carrying out any installation or maintenance work of Monel 400 Tube, remember to use the safety accessories.
Maintenance advice
In the case of Monel 400 Flanges it is recommended to transport between two people and horizontally, depending on the length of the pipe.
In the case of Monel 400 Round Bar it must be transported by a person, affirming the pipe in the center of the roll.
Transport Monel 400 Plate according to the characteristics of each material and the dimensions of the pipes and their access.
Do not drag Hastelloy C276 Tube on the ground or on uneven surfaces.
Deposit Hastelloy C276 Pipe on flat surfaces, without sharp edges.
Protect them against mechanical damage, oils, greases and paints.
Protect them against the sun's rays by means of fixed or temporary roofs.
In the case of transport of flammable or toxic fluids, the maintenance and / or repair of the Hastelloy C276 Flanges must be carried out by installers authorized by the competent authority.
They should be stored in ventilated, dry and moisture-free places. The use of Hastelloy C276 Round Bar and cardboard protection are recommended, in order to avoid damaging the pipes.
Nipples
It fulfills the same function as a couplet, but they carry the thread on the outside. They are joined by welding, mechanical tightening or adhesive.
Reduction coupling
It is a coupling that fulfills the function of reducing the diameter between one pipe and another.
Elbows
They are curved fittings that are used to change the direction of flow of the lines, as many degrees as specified in a project. Standard elbows come ready for prefabricating pipe fitting parts and are generally available in 45 °, 80 °, and 90 °. They are joined by welding, mechanical tightening or adhesive.
Comments