Ball valve manufacturer in India

Specialityvalve is famous for Ball Valve Manufacturer in India. The ball valve is a shut-off valve that controls the flow of liquid or gas using a rotary ball having a bore. By rotating the ball, a quarter turns 90 degrees around its axis so that the medium can flow through. The ball valve is prepared against two seats and has a shaft that controls the device which rotates the ball. A torque is adjusted to rotate the lever arm 90 degrees clockwise or counterclockwise.

 It is identified by its long service life and supplies reliable sealing over the life span even if the valve is not used for a long time. The ball Valve is used for fluid shutoff upstream of oil and gas production. It is used in fuel gas systems for feeding furnaces.

The most familiar design in ball valves is the floating ball valve and trunnion valve. The ball is put up in the media and placed by two sealing rings. The ball is hung at the top and bottom to reduce the load of the valve seats. The ball has a different shapes such as a reduced bore, full bore, and V-shaped.

 Features of ball valve:

1. Swing Check- this stops media from backing up into the system.
2. Valve stops- it only permits 90-degree rotation.
3. Standard Dimension- these dimensions observe with ASMS and make the ball retrofit.

Advantages of ball valve:

1. It is easy to operate
2. It maintains and controls the high volume, high pressure, and high temperature
3. Low cost in maintenance
4. It has a long service life
5. Low-pressure drop and high-flow capacity

Disadvantages of ball valve:

1. Difficult to clean
2. Could not be used as throttling
3. The position of the valve handle is rotated

Types of ball valves:

1. Floating Ball Valve
2. Trunnion Ball Valve
3. Fully Welded Ball Valve
4. Top Entry Ball Valve
5. Jacketed Ball Valve

 Industries of ball valve:

1. Oil & gas Industry
2. Power Industry
3. Chemical Industry
4. Petrochemical Industry
5. Marine Industry
6. Mining Industry

 Parts of the ball valve:

1. Disk
2. Sleeves
3. Seat
4. Stem

 Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M, F55, F51, F53, Monel, Ductile Iron.

PN- PN10 to PN450

Class: 150-2500

Size: 1/2”- 48”.

Operations: Lever-operated ball valve, electric actuated ball valve, pneumatic actuated ball valve, gear-operated ball valve

Ends: Flanged, Buttweld, Socket weld, Threaded

Specialityvalve is a leading Ball Valve Manufacturer in India. It is famous for its premium quality products which come in various materials and designs. We aim to make customers happy and provide them with leakproof and lengthy lifetime products as per their demand.

https://www.specialityvalve.com/product-category/ball-valve/

Double Block and Bleed Ball Valve Manufacturer in India:

Specialityvalve is the best Double Block and Bleed Ball Valve Manufacturer in India. Double block and bleed valves are the applications of shutting in a section of pipe on both sides of the valve rather than just one. It means you close the ball valves to block both the upstream and downstream sides of your working area and then bleed any pressure that residue in the piping and valve.

The main function is to drain/vent the cavity created between two isolation valves, flow diversion, and sampling and injection point connection. The same double block and bleed arrangement can be acquired using three separate valves. The single unit double block and bleed valve saves huge space, weight, installation time, and cost. Also, from the operation and maintenance viewpoint single unit double block and bleed valves are better as potential leak paths are significantly reduced in a single unit. Pressure drop is also minimized.

When selecting a double block and bleed valve one should consider the fluid pressure, and temperature. A ball valve is a shut-off valve that controls the flow of liquid or gas using a rotary ball having a bore. By rotating the ball, a quarter turns 90 degrees around its axis so that the medium can flow through. The ball is mounted against two seats and has a shaft that controls the mechanism that rotates the ball. A torque is applied to rotate the lever arm 90 degrees clockwise or counterclockwise.

Specialityvalve is the greatest Double Block and Bleed Ball Valve Manufacturer in India which gives long service and provides reliable sealing over the life span even if the valve is not used for a long time. The ball Valve is used for fluid shutoff upstream of oil and gas production facilities. It is used in fuel gas systems feeding furnaces.

Advantages of double block and bleed ball valve:

1. Compact design
2. It provides sealing against pressure from both upstream and downstream
3. Prevent product contamination
4. Remove equipment from service for cleaning or repair
5. High reduction of leak paths

Applications of Double Block and Bleed Ball Valve:

1. Oil & Gas, Chemical, and Petrochemical industries.
2. Meter calibration
3. Instrument drain connections
4. Liquid pipelines
5. Refined production transmission lines

Available Materials: F51, ASTM A105, WC6, CF8, CF8M, SS304, SS316,WCB,WCC,LCB, LCC, WC6

Size:  1/2" -12" (15NB - 300NB)

Class: 150 to 2500

Nominal Pressure: PN25 to PN450

Operations: Pneumatic Actuated, Electric Actuated, Gear Operated

Ends: Buttweld, Socket weld 

https://www.specialityvalve.com/product-category/double-block-and-bleed-ball-valve/