.jpg)
MAPELASTIC SMART
Two-component, high-flexibility cementitious mortar (with crack-bridging 2 mm), applied by trowel or with a roller, for the waterproofing of balconies, basins, swimming pools and wet areas.
TECHNICAL CHARACTERISTICS
Mapelastic Smart is a two-component, flexible, mortar made of cementitious binders, fine-grained selected aggregates, special additives, and synthetic polymers in water dispersion according to a formula developed in the MAPEI Research & Development Laboratories. When the two components are mixed together, they form a mix with plastic consistency that can be applied by brush, roller, or spray with a worm screw rendering machine on both horizontal and vertical surfaces with a thickness of approximately 2 mm. Thanks to the high content of synthetic resins and to their quality, the hardened layer of Mapelastic Smart is highly flexible. This feature remains unaffected in all weather conditions. Mapelastic Smart is watertight and resistant to the penetration of aggressive substances, which are present in the atmosphere, such as carbon dioxide, sulfur dioxide and sulfur trioxide, and soluble salts such as chlorides and sulfates, which are present in seawater or in the ground. Mapelastic Smart also has excellent adhesion on all concrete, ceramic, and marble surfaces, provided they are sound and sufficiently clean. These properties, together with its excellent resistance to U.V. rays, ensure that structures protected with Mapelastic Smart are durable, even when located in areas with particularly cold climatic conditions, in coastal areas with a saline-rich atmosphere or in industrial areas where the air is highly polluted. Mapelastic Smart complies with the principles defined in EN 1504-9 (“Products and systems for the protection and repair of concrete structures: definitions, requirements, quality control and evaluation of conformity. General principles for the use of products and systems”) and the minimum requirements of EN 1504-2 coating (C) according to principles PI, MC, and IR (“Surface protection systems for concrete”).
TECHNICAL INFORMATION FOR PRODUCT PREPARATION
Mixing ratio: component A : component B = 2 : 1 (one 20 kg bag of component A with one 10 kg jerrycan of component B)
Thickness applied: final thickness of at least 2 mm (make reference to the paragraph "Application of the mortar")
Application temperature: Surrounding and substrate temperature from +8°C to +40°C Density: 1600 kg/m (for manual application) 2200 kg/m (for spray application)
Pot life of mix: 60 mins. (at +20°C)
ADVANTAGES
▪ High performance: a 2 mm thick film can cover cracks up to 2 mm wide.
▪ Excellent mechanical characteristics thanks to the use of Mapetex Sel N reinforcement.
▪ CE-marked product according to EN 1504-2 and EN 14891 standards.
▪ Excellent elongation at failure (120%).
▪ Fluid consistency for easy application.
▪ Resistant to UV rays
▪ Can also be applied on existing coverings.
▪ Compatible with ceramic, mosaic, and natural stone coverings.
▪ The product is certified EC1 Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product with very low emission of volatile organic compounds.
Choose this waterproof sealer in UAE from Mapei at the best rate and quality you can use for your construction.
Comments