Stainless Steel Stud Bolt
A bolt is a threaded shaft mechanical fastening. Bolts and screws are mechanical fasteners with threaded shafts that are strongly linked. In most cases, these fasteners are placed via two components with linked holes.
Depending on how something is applied, it might be classified as a bolt or a screw, according to alternate meanings. To give clamping force and prevent axial movement, a bolt is put through the section since there are no threaded holes and a nut is placed on the bolt. The clearance hole screw can pass through the first part, but its threads are the same as one of the linked parts' threads. The screw can either cut its own threads or follow the threaded component.
In reality, this concept is hardly utilised. Fasteners whose shafts are only partly threaded are typically referred to as bolts. Screws are the conventional name for their whole shaft threaded fasteners. The cone refers to the non-threaded portion of the bolt shaft. The bolt's shaft stops the pieces from moving radially, while the bolt's head and nut, if used, prohibit axial movement. The unthreaded cone allows a more precise and less abrasive interaction with the more precision pieces. Because the shank lacks the stress concentration that might contribute to failure, it's critical to apply a large shear force to the bolt, causing the shank to extend considerably beyond the connection among both the components.
The hex bolt is the most frequent type of bolt. This features a hexagonal head that provides flat surfaces for applying torque while attaching. For earlier bolts, a square head was utilised, which is still used today for applications that need a lot of torque to be exerted with a wrench. There are several more types of bolts available for specialised uses, such as:
- Hex Bolts
- Heavy Hex Head Bolt
- Hex Flange Bolt
- T Head Bolts
- Stud Bolts
We offer various range of Bolts, in that we have high quality Stainless Steel Stud Bolts, Which contain 16% minimum elongation rate and good hardness as well.
Comments