Having a reliable water heater in Kelowna is essential for every home. You can just imagine the amount of inconvenience a broken water heater in Kelowna can bring. So make sure you go out of your way to maintain your water heater.

Maintenance of water heaters can seem intimidating. But while you need the help of professional water heater technicians such as Bree-Link Plumbing & Heating for major maintenance, you can actually do some things to keep your water heating system in check.

Here are some of the things that you can do to sidestep common problems with a water heater in Kelowna:

Flush Your Water Heater.

Flushing your water heater helps keep it running efficiently and gets rid of the unwanted sediments that would have collected in the heater by now. As you heat water, the minerals in the water source turn into hard water deposits. These sediments can then cause corrosion and wear out the parts of your water heater. Flushing also minimizes your heating bill and prolongs the life of your unit.

Shut off your water source and the water heater first. Make sure you have a hose that will help direct the water once you drain the unit. You attach it to the drain valve and then direct it outside the house or to a bucket. Just let it drain until all the sediments have flowed out and all that is coming from the tank is clear water.

Once this is done, close the valve and then fill up the tank again. Now is the best time to check the unit for leaks and other obvious signs of wear and tear. Once this is done, turn the power back on. Make sure you also check the pressure relief valve. This maintains the right temperature of water and also prevents the unit from over-pressurizing.

Use Insulation

Insulating the water tank helps prevent heat loss. This is a helpful step in lowering your energy bills. Choose the right insulation materials. Foam is a recommended material in covering the pipes. You can purchase bubble wrap that has a foil covering for the water tank.

Prevent Leaks

Make sure you take the preventive steps that will help reduce the possibility of leaks. Aside from regular inspections to find out if there is rust in the water, you would also want to check the anode rod. If you notice corrosion in the anode rods, you might need to talk to a technician to have it replaced.

Most water heaters are designed to last for a long time. However, with some effort on your part, it can last even longer and can run efficiently. So don’t forget to get annual maintenance for your water heater in Kelowna.

James Bruce is the author of this article. For more details about Efficient water heater in Kelowna please visit our website: bree-linkplumbingandheating.ca