If you are looking for how to connect a Brother printer wirelessly, then this article is absolutely for you. This article will show you how to connect a Brother printer on your Windows and Mac wirelessly.
A wireless network is easy to set up compared to wired networks. Wireless networks do not require cabling and deliver a highly stable network option, especially in a rental building that does not have cabling.
A wireless network is just a click away whether you’re using a desktop computer, laptop, tablet, or smartphone. It makes it easier for customers, partners, as well as employees, who may need to complete different tasks throughout the day, the flexibility and ability to do so. So, let’s start with the wireless connection below: Visit at – brother.com support.
How To Connect a Brother Printer Wirelessly?
Below we have gathered three different methods of wireless networks to connect a Brother printer to your Windows and Mac wirelessly:
Method 1: Using WPS Mode
If your Wi-Fi router or access point supports WPS mode, settings and connections can be easily configured. Complete the basic instructions below in order to connect a Brother printer wirelessly using WPS mode:
- As your initial step, ensure that your Wi-Fi router or access point has the WPS icon.
- Then, put the Brother printer within range of a Wi-Fi router or access point.
- The limit may vary depending on your location. See the steps supplied with the router.
- Push the WPS button on your router, then hit the Wi-Fi button on your printer for 5 seconds.
- The Wi-Fi lamp on your printer blinks blue once every second.
- When the connection is set, the Wi-Fi lamp blinks blue.
- Ensure that a PC on the same network as your printer will have access to the printer.
Note: The Brother printer will attempt to connect using WPS mode for 2 minutes. If the Wi-Fi push button is held down for another 5 seconds during that time, the printer will continue to attempt to connect for an extra 2 minutes.
Method 2: With Wi-Fi Direct Mode
Wi-Fi Direct lets you connect a Brother printer directly to your computer without a Wi-Fi router or access point; the Brother printer acts as a Wi-Fi access point.
- Confirm the printer’s Wi-Fi Direct settings. Use a Mac or Windows to confirm the setting.
- For Windows users:
- First, connect the printer and your computer via a USB cable.
- After that, start the Printer Setting tool on your PC, and select the “Communication Settings“ button.
- Confirm that the “Wi-Fi Direct” option is set for the “Selected Interface” section in the “General“ tab.
- For Mac users:
- First of all, connect the printer and your computer via a USB cable.
- Then, start the Printer Setting tool on your PC, and confirm that the Wi-Fi Direct option is set to “On“ mode in the “Wireless LAN” tab.
- Push the Wi-Fi button on the printer for 1 second to turn it on.
- In the next step, the Wi-Fi light blinks blue once every 3 seconds.
- Now, use your computer to select the printer’s SSID (Wi-Fi name) and input your Wi-Fi password.
- Once the connection is established, the Wi-Fi light flashes blue.
visit at- brother Printer Support
Method 3: Via Ad-Hoc Mode
Ad-Hoc Mode allows you to connect a Brother printer directly to your computer without a Wi-Fi router or access point.
Note: Not all desktop computers or smartphones may support ad-hoc mode.
- Click and hold the Wi-Fi button on the printer for 1 second to turn on the Wi-Fi function.
- After that, the Wi-Fi lamp blinks blue once every 3 seconds.
- Use a Windows or Mac system to configure the printer’s ad-hoc mode settings.
- For Windows users:
- Connect your printer and a PC using a USB cable.
- Then, start the Printer Settings tool, and select the Communication Settings button.
- Select the Wireless LAN option for the Selected Interface section in the General tab.
- The Ad-hoc mode option for Communication Mode in Wireless Settings is in the Wireless LAN tab.
- For Mac users:
- Start the Wireless Device Setup Wizard in the driver software, and follow the on-screen prompts.
- If you haven’t downloaded the driver software, go to “support.brother.com.“
- Once the file is downloaded, double-click on the file.
- The Wireless Device Setup Wizard will be found in the Utilities folder.
- Use your PC to select the printer’s SSID (Wi-Fi name), and if you set your Wi-Fi password on the printer setting tool, type the password.
- Once the connection is established, the Wi-Fi lamp flashes blue.
Source Url- how to connect a brother printer wirelessly
Comments