There may be a time when you need to replace a bag strap and this may not sound like much fun, but it is actually a pretty cool project. This guide will help you revive an old bag or create a new look for your favourite bag easily and effectively. Starting with the basic Louis Vuitton Bag Strap replacement to designing your custom Leather Bag Straps, there are details that you have to learn. Apart from this, it will help to breathe new life into your bag, as well as being a perfect way to show your personality. Let’s get started!
Materials Needed
To start with, the following items should be assembled.
- Leather straps for bags or Leather Bag Straps
- A sharp object such as a pair of scissors or a cutter that is used in cutting leather material.
- Punching tool for holes
- A needle and a strong thread or a sewing machine.
- Bags accessories such as buckles, rings, or a gold chain extender
Step 1: Unfasten the Old Strap
First of all, you should gently cut out all the old straps from your bag. To remove any stitching, a pair of scissors or even a seam ripper is recommended. If it is a bag with clips or rings, then all you have to do is to unclasp the strap. Retain any hardware such as buckles or rings, if these are not severely damaged and can be utilised again.
This step is important so that the bag and its fabric are not further damaged. Be patient and do not be rough on the fabric, especially when handling special clothing.
Step 2: Measure and Cut the New Strap
Determine the length of the old strap or if you want it to be adjusted to another length, then measure the new length. Ensure that you use the measuring tape so that you can get accurate measurements. Measure and draw a line whether your new strap material with pencil or chalk.
Trim the strap to achieve neat cuts that are straight, if the cuts are uneven, you will have to redo it. For Leather Bag Straps, use a sharp leather cutter because it will provide the best results. When using the bag gold chain ensure that you count the links to achieve the required length of the chain.
Step 3: Punch Holes and Install Hardware
If you need to insert holes on your strap where you will be fixing buckles or clips, then use a punching tool to do it. To maintain symmetry make sure that the distance from one hole to the other is properly measured.
Put on any hardware that would be needed such as buckles or rings. This is where you can be as innovative as you want with bag accessories. A handbag chain or a gold chain extender can improve the look of the bag and become a lovely addition.
Step 4: Stitch the Strap
You should take a strong thread to needle or, if using a sewing machine, this is the right time to thread it. Stitch the two ends of the strap to fasten the hardware on the clothes. If you want your seams to be more stronger then use a double stitch.
It is advisable to first sew a piece of leather that you are not so sure about its outcome so that you can get a feel of how the machine works. This will help you get the feel of it before you get started with your actual strap.
Step 5: Place the New Strap on Your Bag
Last but not the least, fasten your new strap to the bag. If the bag has clips or rings, then the strap should be attached there If not you can sew the strap. When it comes to the sewn-in straps, one should make sure to use a strong stitch to attach them to the bag.
Tug the strap firmly to make sure it is properly connected and strong enough to bear the weight of the bag. Finally, you can walk around with the bag to feel whether everything is alright.
Conclusion
Replacing the strap of your bag can revive your old bag and at the same time, give you the chance to design the bag of your choice. Regardless the choice of the Louis Vuitton Shoulder Strap or the Bag Chain Strap, this is one of the simplest DIY projects that you can have fun doing while being useful at the same time. Australian readers, LS Leather has a wide array of leather making supplies Australia for your Shoulder Bag Straps needs.
Comments