Electric Actuated Globe Valve Manufacturer
Valvesonly Europe is an Electric actuated globe valve manufacturer in Italy.An electric actuated globe valve is a globe valve with an electric actuator that moves the stem down and up to vary the gap between the disc and the seat to achieve close and open control. It is commonly used in pipelines to either cut off or spread motion direction. This Electric Actuated Globe Valve is primarily used for controlling steam, water, and compressed air. It is not suitable for substances with a high viscosity and a high crystallisation potential.
An electric actuator is a mechanical device that converts electricity into kinetic energy in a single linear or rotary motion. The electric actuator could be a device that improves a stack or performs a force-required task, such as clamping, by using an electric motor to generate the necessary force. Electric quarter-turn valve actuators are a type of rotating mechanised valve actuator. A quarter-turn electric actuator can only rotate 90 degrees because electric revolving actuators convert electric energy into rotating power. The torque generated by the electric engine is transmitted to the valve via a yield drive. AC (alternating current), DC (direct current), or they can work on it if possible are the engine voltage options. The engine is protected by a strong, compact housing that also houses various actuator components such as gearings, limit switches, wiring, and so on.
Our electric actuated globe valves are the safest and best solutions in remote, difficult areas due to their simple operation process. These valves can work with a wide range of media, including water, steam, oil, gas, and air. Some valves also have a reverse motor that allows the motion to be controlled in both directions. These electrically operated valves are suitable and high-performing valves. These are made of the highest quality materials and are designed to withstand even the most extreme conditions.
Advantages of Electric Actuated Globe Valve:
• It can work in a variety of mediums such as gas, air, water, oil, and many others. • It also has a reverse motor for when the fluid needs to flow in both lines.
• It has a simple structure, a small volume, and is lightweight.
• It is dependable.
• It's simple to use, with quick opening and closing.
• Maintenance is simple.
Description:
· Body materials: Monel, Incoloy, Inconel, Duplex steel, Carbon steel (WCB, WCC, WC9, WC6), Cast iron, SS304, SS316, Titanium, Zirconium
· Size: 1/2" to 24".
· Class: 150 to 2500
PN10-PN450.
· Ends: Socket weld butt weld, flanged, threaded.
· Operations: Electric Actuated
· Electric actuator details-
· Torque – 3 – 9 nm
· Operating pressure- 8 Bar
· Port Connection-NPT1.4”
· Mounting Base-ISO5211
· Temperature--20°C - +80°C
Uses of Electric Actuator Valve:
Electric Actuator Valve is useful when the air supply is not available. It has a high degree of accuracy, flexibility, and a lower overall operating cost.
Where it is used:
Electric actuated globe valves are utilised in chilled and hot water applications to give exact control.
Electric Actuated Globe valve is used in many Industries such as:
· Food and Beverage Industry.
· Mining Industry.
· Chemical Industry.
· Power Industry.
· Pharmaceutical Industry.
· Plup and Paper Industry.
· Textile Industry.
For more details visit our website; https://www.valvesonlyeurope.com/product-category/electric-actuated-globe-valve/
Electric actuated gate valve manufacturer
Are you looking for the best electric actuated gate valve manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer In Italy. An Electric Actuated Gate valve which is used to completely shut off the fluid flow or completely open the same. An electric actuated gate valve is operated automatically. They require a little space along the pipeline. These valves are less complex to construct than any other types of larger valves. It consists of three components which is the body, bonnet, actuator, and trim. They are mostly used in refineries, petrochemical and process plants. They are suitable for steam, oil, water, and gas.
Advantages of Electric Actuated Gate Valve:
· It is suitable for both above ground and underground installation.
· The closuring feature of this valve is exceptionally good.
· These valves can be used in both ways in circuit.
· Pressure loss is minimum
Size: DN15 to DN700
Pressure: PN10 to PN450,150 to 900
Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316,CF8M, SS316L, SS904L,Wcb, Wcc, wc9, wc6
End: Flanged, Socket weld, Butt weld.
Operation: Electric actuated.
· Electric actuator details-
· Torque – 3 – 9 nm
· Operating pressure- 8 Bar
· Port Connection-NPT1.4”
· Mounting Base-ISO5211
· Temperature--20°C - +80°C
For more details visit here : https://www.valvesonlyeurope.com/product/electric-actuated-gate-valve-2/
Comments