Stainless Steel Nuts and stainless steel fasteners exist in a variety of forms and sizes, with each offering specific advantages. Many people, however, are unaware of the variety and its benefits. Stainless Steel Nuts educational blog has been produced to shed some light on the aforementioned subject, so you can make more informed purchasing decisions.
Hex Nuts
Hex nuts, which have six sides, are the most prevalent type of stainless steel nut. The unusual shape allows for a strong wrench grip at varied angles. As a result, hard-to-reach areas where a wrench cannot turn 360 degrees can be easily accessed for repairs, installs, and so on.
Hex nuts are widely used for the following purposes:
- Wood and metal
- shackles for anchors
- Stainless steel fasteners with external threading, such as bolts and screws have a thread size greater than 1/4-20.
- Cap bolt screws with flathead, pan head, oval head, round head, truss head, and hex heads, as well as larger-sized socket head cap screws with flat, button, and cap head screw bolts
- Mechanisms of locking
Hex stainless steel nuts with a right-hand thread are common in a range of manufacturing applications.
Wing Nut
These nuts include two flat wings on either side that enable easy tightening and loosening with just your fingers. Unfortunately, these are not designed for high strength and are typically used where convenience outweighs strength.
Wingnuts are classified into four types:
- Stainless steel wingnuts
- Hot forged wingnuts
- Die-cast wingnuts
- Carbon steel sheet metal wingnuts
Wingnuts can be used for a variety of purposes, including:
- Industrial,
- Construction
- OEM applications where corrosion resistance is critical
Cap Nuts
These nuts are made of stainless steel and have a dome rather than a flat top. Surprisingly, they improve aerodynamics, which is good for aircraft and automobiles but is usually used for aesthetic reasons on handrails and steel furniture.
Cap nuts have the following applications:
- Hex nuts are the six-sided nut that is used for general purposes.
- Hex nuts are often used in conjunction with a bolt or machine screw.
Nuts in squares
Square nuts have four sides and are more difficult to remove. Because the underside has a larger surface area than ordinary hex nuts, it can hold more effectively when fully tightened.
Applications for square nuts include:
- Industry of utilities
- As a blind nut in furniture
- Rail corridors
- As a base in stainless steel fastener metal channels
Comments