Copper Strips
The term "copper sheet" refers to rolled copper, both hot- and cold-rolled. Copper strip refers to copper coils with thicknesses ranging from 0.06 to 1.5 mm. Copper strip is a term used to describe copper rolled products with thicknesses ranging from 0.06 to 1.5mm. Copperplate belts are separated into four grades: brass plate belts, copper plate belts, bronze plate belts, and white copperplate belts.
Features of Copper Strips
It has a high level of corrosion resistance.
It needs to be electrically conductive.
Size tolerance is very narrow.
Concentrated content composition.
Dimensional stability is excellent.
There's a wide selection of sizes to choose from, and they're nearly maintenance-free.
Smooth, low-fat surface.
There's a wide selection of sizes to choose from, and they're nearly maintenance-free.
Types of Copper Strips
Bare Copper Strip
The corrosion resistance of these strips is well-known. Automatic machines are the most prevalent application for these strips. They are mostly used due of two key features: the ability to reduce waste and the potential to improve productivity.
It has been discovered that manufacturing companies use them as raw materials in a variety of machinery. They are primarily used by production enterprises located in areas with significant salt concentration in the soil.
Long service life, precision engineering, dimensional control, and crack-free bends are the major qualities. The available width of these strips ranges from 6 mm to 359 mm, with thicknesses ranging from 0.01 mm to 60 mm.
Switch terminals, electrical conductors, electrical contacts, and electrical circuits are the most prevalent uses for these strips.
Enameled Copper Strips
Enamelized copper strips are another popular strip type produced by a copper strip manufacturer. They are mostly used for insulation. Its exceptional performance value supports it in a variety of applications.
They are defect-free, which is why they are used in a wide range of switch gears as well as oil field transformers. Enamelized copper strips are also used for binding in several enterprises. Special transformers, electric motor stators, and high voltage motors are all held together using these strips.
Durability, tensile strength, heat/weather/water resistance, and flexibility are all important characteristics of these strips. Polyesterimide Enameled Rectangular Copper Strip Class 180, Polyester Enameled Rectangular Copper Strip Class 155, and Polyesterimide over coated with polyamide-imide enamelled Rectangular Copper Strip Class 200 are the three primary types of products available on the market.
All of these goods have the same cross-sectional area and width, which span from 3mm2 to 75mm2 and 1mm to 5mm, respectively.
Source : https://www.rkmi.co.in/copper-strips-supplier-stockist.html
Comments