Got your very first Cricut cutting machine? It is obvious to need clarification about how to set up a new Cricut machine and make the most of it. But you need not bother. Here is a useful post explaining the setup process and steps to connect to Design and do your first project. We will discuss the easy setup process in the new Cricut machine – Cricut maker and Explore Air 2. Let’s begin by opening the machine box first.
Step 1 – Opening New Cricut Machine Box
So, you have brought your new Cricut. Now comes the opening of the box. Proceed by opening the box lid; you will see a mat folded over the machine’s top. In Cricut Explore Air 2, you’ll find a blue Light Grip mat, whereas the maker includes a green Standard Grip mat inside the box. An instruction packet, power cords, a black pen, and the new cutting BFF are available in the box. Empty that vox and take the dust jacket off the machine. Make sure to remove any other tape pieces available on the device.
- In case you have a Cricut Maker, lift the top lid open. You’ll see the front door automatically opens at the same time.
- And in the case of Cricut Explore Air 2, press the button ( that says open) present on the left side of the machine. You will see that both doors have opened on their own.
For both Cricut maker and Explore, don’t pull the automatically open doors. Allow them to open on their own. When you see that the doors are open, remove the foam pieces and any tape if there is any inside. At last, you need to open the packet of envelopes. It includes instruction material, registration cards, and materials for the first test project.
Step 2 – Turning On New Cricut Machine
In the next step of the setup process, you need to turn on your new Cricut machine. Open up the power cords (one that came in your box) and plug them into the wall. Now, hit the other cord into the thing plugged into the wall. Please take out the chain you’ve created and plug it into the machine’s back.
Now, get ready for the exciting part. Open up your laptop or desktop computer and navigate to cricut.com/setup. There a page mentioning Design Space for your computer types can be seen. Select the Download option and follow the instructions to download software to your computer.
In Cricut Design Space, you can create designs. When you see two images inside the newly downloaded Design Space Software, choose the smart cutting machine option and the type of machine you want to set up. Then create a Cricut ID. On your screen, you will find three things:
- Prepare your workspace first.
- The next step is to plug in and power on your Cricut machine.
- Connect your included USB cord to the computer and the Cricut machine’s back. Finally, register and update your device by following the instructions on the screen.
Step 3 – First Cut With New Cricut Maker/Explore Air 2
Are you excited to make your first cut? Choose an option from the six options available on your screen. Explore Air 2 has a dial on top to select materials, but in Cricut Maker, you will not find any dial. All the selections of materials are made within the Design Space. You must follow on-screen instructions for the machine you’re using.
When you get asked to prepare for a cut, head to put your material onto your mat, you can use the included mat and peel off the plastic protector cover from the mat. Put your test material (one that came with your welcome packet) and match up the photo in the on-screen instructions. When you’re asked to confirm that the blade is inserted into clamp B, ensure it is there and then load the mat. Loading means sliding the mat into the slots and pushing forward as far up as it goes.
Hold the mat in place with your left hand and press the blinking arrow light with your right hand. When the machine starts pulling the mat into place, let it let go when you press the blinking C button. Your first cut will automatically begin. Once the cut is complete, click the blinking arrow button again and release the mat. Now, remove your cut from the mat. Turn it over upside down on a flat surface and peel the mat away from your paper or vinyl. This way, you can avoid tearing too. If there are unwanted pieces, pee them off using a weeding tool.
Note: Push it as far up as possible; the material will not go under the first rod.
These easy steps on How To Setup New Cricut Machine will help you do your first project. Moreover, we have provided some of the most commonly asked questions below to have a clear understanding.
Frequently Asked Questions
Is It Important to Calibrate New Cricut Maker?
No. Cricut makers come pre-calibrated for rotary blades; thus, it is all set to cut fabric right out of the box.
How Much Time does It take to Set Up Cricut Maker?
Though the time to set up the machine can vary, it’s generally around 15-20 minutes.
Can I Connect Cricut Maker Wirelessly?
Both Cricut maker and Cricut Explore Air 2 are Bluetooth-compatible devices; thus, you can use Bluetooth with your Cricut device. All you need is simply to pair your machine with your computer.
Visit Site – cricut.com/setup
Source :- https://set-cricutcut.com/how-to-setup-new-cricut-machine/
Comments