Canon printers are used widely because of their quality printing. One of the most common queries that their users always ask is how to change printer ink of Canon.
But now, don’t worry. Here, in this post, we’ll discuss the right ways of changing the ink in canon printers. So, if you find the ink level is low or your printer is not delivering quality prints as an output, just refer to this guide. We have tried to come up with a satisfying solution for changing the ink in a printer.
Points to Remember Before Changing Canon Printer Ink
But before proceeding with the change/replacement of printer ink, give a look at some of the useful points.
- Always go for a new genuine ink cartridge instead of using the third-class or non-effective ink cartridge because it may cause the printhead clogging of nozzles.
- If you make the decision to remove the cartridge from your Canon Printer. one thing you can do immediately is “replace the ink” and hence increase the level.
- Wipe out the ink cartridge using a clean white cloth.
- Make sure not to leave the ink cartridge door open in your printing machine once you’re done with removing its packaging and filling the ink.
- Go for an ink cartridge that has a proper date of use. Try to use it as per the date mentioned there.
Read Also:- Scanning with Canon Printer
Basic Steps on How to Change Printer Ink of Canon Efficiently
If your printer is not delivering quality prints, all you can do is put ink in your Canon printer instantly. After refilling the ink, you can begin to print and receive quality documents without obstructions.
- First, ensure that your printer is turned off and disconnected from the power source. If this is not the case, then simply disconnect it from the wall outlet.
- Turn off and disconnect your printer from the power source. (Simply disconnect it from the wall outlet).
- Now, move forward by slightly opening the front cover of your Canon printer.
- Remove any paper that is stuck from the paper tray.
- In the next step, open the paper output cover and then glimpse cautiously for an empty cartridge.
- To remove the cartridge, just push it down. Also, make sure to use the original ink manufactured by Canon.
- Replace the ink cartridge with a new one and place it properly too.
- Close the printer access door and turn your printer on. Connect it back to the power source/wall outlet.
- Finally, check the functionality of your printer by printing a test page.
If the steps mentioned above didn’t work, try replacing the ink in the Canon printer.
Alternative Method for Replacing Ink in Canon Printer
- The first thing you can do is open the access door of your Canon printer.
- Push down the empty cartridge from your printer to release it out, and then pull the cartridge.
- In the next step, remove the protective tape applied to the new ink cartridge.
- And then insert the new ink cartridge into the proper place.
- Now, close the access door of your printer and wait until the cartridge goes to the resetting position.
- The last step is to check whether replacing the ink cartridge is working for you or not.
Read Also:- How To Fix Canon Printer Not Responding Error Manually?
Conclusion
The steps mentioned above are for all those who are struggling and looking for solutions on how to change printer ink of Canon. Once you go through the post, the process will become hassle-free.
Frequently Asked Questions
Why My Printer is Not Recognizing Compatible Cartridges?
If you are experiencing a printer not recognizing new ink/ toner cartridge issues, here are some steps you can take.
- Take the cartridge out of your printer and remove all strips, tabs, or plastic covers before installing the cartridge again.
- Clean metal contacts as it can stop the chip data from being read.
- Broken plastic parts can sometimes prevent the toner from sitting correctly in the printer slot. The Solution is the replacement of toner.
How To Fix Cartridge Leaking Issue?
There can be times when your Canon printer refuses to work because of the cartridge leaking issue. If you see a bit of ink, try reinstalling it to resolve the problem. Simply remove the cartridge and try installing it again.
Visit Site – ij.start.canon
Source :- https://ijstart.printerstartsetup.com/how-to-change-printer-ink-of-canon/
Comments