On the surface, putting up fences may seem like a straightforward process. You could even do it yourself as long as you have the right tools, know the process and are handy with tools. But minor complications might convince you to call professionals to install a Fence Gate in Jupiter FL.
These minor complications or mistakes could include property demarcation or forgetting to treat the wood before installation. This could affect the quality of installation or lead to lawsuits.
This does not mean you should not try DIYing at all. As long as you watch out for some common fencing mistakes, your fences will turn out right.
Encroaching Neighbor's Property
Fences are useful for demarcating your property from your neighbors'. The caveat is that you should know what comes under your property. Fencing upon your neighbor's property or public property can lead to fines and other unnecessary costs. It's also quite embarrassing to boot.
Having a blueprint of your premise is important before starting the installation. If you aren't sure, then you can get a survey done first. It will also give you a good estimate of how much fencing material you need.
Ignoring Local Zoning Laws
Not every neighborhood allows all kinds of fences to be installed. Local authorities may place certain restrictions based on their requirements like being in a wildlife zone. The laws may include details like height, material, add-on, etc. You need to comply with the local guidelines to avoid penalties that may apply.
Forgetting To Consult Utilities First
Your yard may have many wires or pipes passing under it. When digging posts for fences, you always run the risk of hitting and damaging them. That’s why you should consult utilities before installing fence posts around your area.
Digging Shallow Post Holes
Making sure that the post holes are deep enough and consistent is important for the strength of the fences. If the fence posts are installed too shallow, the fences may tilt or even fall over completely. Installing the fences too quickly also creates the same issue. How deep the fence post holes need to depend on the specific fence type you buy.
Not Treating Wood Fences Properly
It's very important to treat wood fences before putting them up. Failure to do so could lead to damage due to harsh weather conditions and termites. Untreated wood tends to dry out, crack or splinter. That's why always use pressure-treated wood fencing and apply sealant on it after you’re done with the installation.
Doing It Alone
Doing it alone while possible is difficult. It’s best to have at least one more person with you during the installation. A helping hand can make moving stuff easier and make the project go faster. Your partner could watch your work while you watch theirs for errors. This ensures the effectiveness of the fences after installation.
Not Pouring Enough Concrete
You need to pour enough concrete into the post holes to help them set correctly. It’s important for a durable and long-lasting fence. It’s important to ensure that the posts have been set properly before installing rails and other parts.
Missing Elevations
Not everyone is blessed with a flat backyard, there might be some elevations. These might affect your ability to maintain a straight line with the fence posts. You need to calculate the difference in the rise and fall for different sections to ensure a proper installation.
Installing Pool Fence Without Self-Closing Gate
Having a self-closing gate is essential for a Pool Fence in Stuart FL for security and safety concerns. With a self-closing gate, you can prevent animals and people who aren’t supposed to be there from entering.
A gate with a self-closing latch can prevent kids from entering the pool area without your supervision and keep them safe.
These are some common mistakes that should be avoided when installing fences by yourself. Avoid them to avoid costly repairs and reinstallations. You can consult professionals instead if these seem cumbersome.
Comments