Specialityvalve is one of the largest Pressure Safety Valve Manufacturer in India. A pressure safety valve is used to release gases or liquids. The purpose of a safety valve is to be the last line of defense in protecting equipment, the environment, and most important personnel. It can be used as a final measure to prevent accidents rather than consistently maintaining pressure. These valves are heavily regulated and must meet ASME code requirements.
The pressure safety valve must be able to operate at any time in any condition. The operation cannot rely on a power source so it is operable in the case of a power outage. The factors that need to consider when selecting a pressure safety valve are set to pressure, temperature, back pressure, connection size, and required capacity.
A safety Valve is a pressure relief valve that releases a substance from a boiler, pressure vessel, or another system. Their primary role is safety and is used for boiler overpressure protection, and process operation to prevent product damage due to excess pressure. The primary function is to protect life, the environment, and property against the failure to control system pressures, and last it offers reducing system pressure before total failure.
Types of pressure safety valve
- Spring-loaded pressure safety valves
- Pilot-operated pressure safety valves
- Full lift pressure safety valve
- Low lift pressure safety valve
Benefits of pressure safety valve
- Life protection.
- forming to open and release extra pressure from machinery.
- Prevent fluid release
Materials: Cast iron, Ductile Iron, WCB, SS304, SS316, CF8, CF8M, WC6, WCC, LCB, LCC.
Class: 150 to 2500.
Nominal Pressure: PN10 to PN450.
Ends- Butt weld, socket weld, Flanged, Threaded
Size: ½” to 40”.
Specialityvalve is one of the best Pressure Safety Valve Manufacturer in India and has one of the most popular products which are available in a variety of sizes and can also be customized to meet the needs of our customers. All the products are tested according to requirements and standards.
https://www.specialityvalve.com/product-category/pressure-safety-valve/
Industrial Valve Manufacturer in India:
Specialityvalve has been the greatest producer and supplier of Industrial valve manufacturer in India. Industrial valves are devices that are used to adjust liquids, gases, and slurries. The flow of liquids or gases can be managed using these valves. This can be done through pipes and other passageways by opening, closing, and partially obstructing the passageway or pipe. Industrial valves are used to hold high pressure, either from fluid or gas, and to last through years of use in harsh environments.
The three common valve purposes include stopping and starting flow, throttling (control) flow, and acting as a non-return check for flow (check).
The industrial valve manufacturing process is a complicated endeavor. It is not just an easy creation of the valve. Many factors contribute to its order: raw material procurement, machining, heat treatment, welding, and assembly. Valves should undergo rigorous tests to ensure proper functioning before manufacturers hand them over to the customer.
Types of Industrial Valves:
1) Control valve- A control valve is a power-operated device used to regulate the flow of fluids such as gas, oil, water, and steam. It is also known as a final control element. It is operated electrically and pneumatically. The valve body is a different style or type which depends upon service condition, piping layout, and desired application.
2) Check Valve- The Check Valve is also known as one way valve, which allows the flow of fluids to move in one direction only. The check Valve also helps to prevent backflow in the system. It may cause problems if the flow is contaminated and therefore contaminates the media upstream. The application of check valves is the protection of upstream equipment, preventing media contamination and it prevents from drainage.
3) Safety Valve- A safety Valve is a pressure relief valve that releases a substance from a boiler, pressure vessel, or another system. Their primary role is safety and is used for boiler overpressure protection, and process operation to prevent product damage due to excess pressure. The primary function is to protect life, the environment, and property against the failure to control system pressures, and last it offers reducing system pressure before total failure
4) Gate Valve- Gate Valve is a valve that opens by lifting a barrier out of a path of a fluid. It is designed with a fully open or closed service. Operation of a gate valve is performed either clockwise to open or clockwise to close. The gate moves up or down on the threaded part of the stem.
5) Globe Valve- Globe Valve is also known as a spherical body shape with two halves of the body which are separated by an internal baffle. It has an opening that forms a seat onto a movable plug that can be screwed to shut the valve. It is primarily used in situations where the throttling of commodities is required. The globe valve body has a disk and a seat where the disk moves up and down the plane to the seat to let the flow pass.
6)Butterfly Valve- A Butterfly Valve is a mechanism that regulated the flow of materials within a large pipe diameter by the quarter-turn of the disc. It is a motion like a butterfly that has wings that move up and down at 90 degrees. The butterfly valve is a metal disc framed on a rod. It is operated when the valve completely blocks the passageway and when it is open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid
7)Plug Valve- The Plug Valve is a quarter-turn rotary motion manual valve. It offers a straightway passage through the ports so that fluid can flow through the opening plug (cylindrical or tapered plug) with a minimum of turbulence. The plug Valve is different from other valves due to its plug disc design.
8)Ball Valve- A ball valve is a shut-off valve that controls the flow of liquid or gas using a rotary ball having a bore. By rotating the ball, a quarter turns 90 degrees around its axis so that the medium can flow through. The ball is mounted against two seats and has a shaft that controls the mechanism that rotates the ball.
Available materials: Ductile iron, Monel, WCB, WCC, WC6, LCB, LCC, SS304, SS316, CF8, CF8M, CF3, CF3M, Aluminium Bronze, Bronze, Brass, F55, F53, F51, Inconel, Incoloy, Titanium
Class: 150 to 2500
Nominal Pressure: PN6 to PN450
Size: ½” to 80”
Ends: Flanged, Wafer, Lug, Buttweld, Socket weld, Threaded
Operations: Lever operated, Gear operated, Electric actuated, Pneumatic actuated
https://www.specialityvalve.com/
Comments