SVR Global is the reputed Forged Steel Check Valve Manufacturer in USA and supplies good quality valves to marine industries, wastewater industries and chemical industries in Oklahoma, Rhode Island and Maryland. A forged steel check valve is made from forged steel, which is a process that involves heating and shaping steel under high pressure. strength and durability, making it suitable for high-pressure and high-temperature applications.
This valve works by allowing fluid to flow in one direction while preventing backflow in the opposite direction. The valve has a disc or ball that moves freely within the valve body, and is held in place by a spring or other mechanism. When fluid flows in the desired direction, the disc or ball moves away from the valve seat, allowing the fluid to pass through. If there is backflow, the disc or ball is pushed back onto the valve seat, preventing the fluid from flowing in the opposite direction.They are available in a range of sizes and pressure ratings, and can be used in high-pressure and high-temperature applications.
PARTS
· Body
· Hinged disc
· Hinge pin
· Seat
· Stem
· Bonnet
TYPES
· Swing check valve: A swing check valve has a hinged disc that swings open to allow fluid to flow in one direction and closes to prevent backflow in the opposite direction.
· Lift check valve: A lift check valve has a disc that lifts off the valve seat to allow fluid to flow in one direction, and closes to prevent backflow in the opposite direction.
· Dual plate check valve: A dual plate check valve has two plates that are hinged together and move in opposite directions to allow fluid to flow in one direction, and close to prevent backflow.
· Tilting disc check valve: A tilting disc check valve has a disc that tilts to allow fluid to flow in one direction and closes to prevent backflow.
· Ball Forged steel Check Valve: A ball forged steel check valve incorporates a ball-shaped disc to control the flow of fluid through the valve.
Silent Forged steel Check Valve: A silent forged steel check valve is designed to minimize noise and vibration during operation. It works in a similar way to other check valves, with a disc that opens to allow fluid to flow in one direction and closes to prevent backflow in the opposite direction.
· Pressure seal Forged steel Check Valve: A pressure seal forged steel check valve is a type of check valve designed to handle high pressure and high temperature applications.
· Non slam swing Forged steel Check Valve: A non-slam swing forged steel check valve is a type of check valve designed to prevent water hammer and reduce noise and vibration during operation.
INDUSTRIES
· Chemical Industry
· Pulp and paper Industry
· Marine Industry
· Mining Industry
· Power Generation Industry
· Oil and Gas Industry
· Nuclear Industry
· Petrochemical Industry
APPLICATIONS
· Oil and gas industry: Forged steel check valves are commonly used in the oil and gas industry to control the flow of fluids in pipelines and other equipment, and to prevent backflow.
· Petrochemical industry: Forged steel check valves are used in the petrochemical industry to control the flow of fluids in chemical processing and refining, and to prevent backflow.
· Power generation: Forged steel check valves are used in power generation applications, such as steam and gas turbines, to control the flow of fluids and prevent backflow.
· Water and wastewater treatment: Forged steel check valves are used in water and wastewater treatment applications to control the flow of fluids and prevent backflow.
· Mining industry: Forged steel check valves are used in the mining industry to control the flow of fluids and prevent backflow in pipelines and other equipment.
FEATURES
• Enhanced durability
• Corrosive Resistance
• Easy and safe installation
ADVANTAGES
· Durability: Forged steel check valves are made using a process that involves heating and shaping steel under high pressure, resulting in a strong and durable valve that can withstand high pressures and temperatures.
· Corrosion resistance: Forged steel check valves are resistant to corrosion and can withstand harsh environments, making them ideal for use in applications where fluids are corrosive or abrasive.
· Tight seal: The pressure seal design of forged steel check valves ensures a tight seal and prevents leaks or fugitive emissions, providing an extra level of safety and reliability.
· Wide range of applications: Forged steel check valves are commonly used in a wide range of applications, including oil and gas, power generation, petrochemicals, water and wastewater treatment, and more.
· Various designs: Forged steel check valves are available in various designs, such as swing check, ball check, and lift check, to meet different application requirements.
· Low maintenance: Due to their durability and resistance to corrosion, forged steel check valves require minimal maintenance, resulting in lower overall costs and downtime.
• Prevents backflow
· Mechanically very easy to use.
• Maintains optimal pressure
• Can be used horizontally as well as vertically
• Allows a full flow without any disturbance
• Very low cost
SVR global is the premium quality forged steel check valve manufacturer in USA , and these valves are efficient in preventing backflow and widely used in many industries.
Body Material- Cast Iron and Cast Steel (LF2, A216, WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F91), duplex and super duplex STEEL [ F51, F53, F55 ] Forged Steel A105, F22, F51, F53, F55, F91, F304, F316)
Size- ½” – 80”
Class-150 – 2500; PN10 – PN-450
Ends-threaded, socket weld, butt weld, flanged, lug, wafer
Visit our site for more information-
Comments