Boom lifts have a higher working height than scissor lifts, with some models reaching over 130 feet (39.6m). Boom lifts have a wider range of motion at the top of the long arm, allowing them to be used in a wider range of applications than scissor lifts.
On the other hand, because the boom lift has a higher working height than the Scissor Lift, the platform is made more compact than the scissor lift to maintain safety. Therefore, it is also suitable for use in areas where the workspace is small, and access is difficult.
And like scissor lifts, boom lifts are not recommended for use on steep hills or slopes. Because the center of gravity of both machines is higher than other machines, the risk of overturning increases even with a little effort. However, working on slopes is possible if the maximum slope is not exceeded with a safe workload.
Boom lift and used Electric Forklift Sales can be offered not only from specialized dealers but also at auctions. There are many forklifts that do not have any problems, even if they are old. Be sure to check the condition of the battery and vehicle before purchasing.
To safely operate a Boom Lift on slopes, it is essential first to know the lift's maximum slope rating.
Slope can be measured accurately using a digital inclinometer. But if you don't have a digital inclinometer, first place a 90cm or longer board on the slope. Next, place a carpenter's level on the board and raise the lower bridge of the board's level until it is level. Once you've made it this far, it's time for the next step.
1/ Measure the distance to the ground.
2/ Divide the distance by the board length.
Multiply by 3/100.
This simple formula allows you to check the slope. If the slope number exceeds the maximum slope rating, discontinue use on that slope.
Also, keep in mind that maximum grade ratings can change due to ground conditions and weather. For example, water-laden mud and gravel create less friction than normal, which can result in longer stopping distances.
You should also slow down when traversing slopes or rough terrain. Use caution when using the Boom Lift Rental Singapore on downhill or Cliffside slopes.
Tips for using the boom lift safely on slopes
To safely use the boom lift on slopes, here are some tips to must-see before using the boom lift:
- Use the Operation Checklist to verify operability before using the lift.
- Make sure you have proper tire pressure. Low or high pressure can affect lift stability.
- Before starting work, check the surrounding area for embankments, ditches, and holes, and if there are any, take precautions.
- Only use lifts designed for climbing slopes.
- Do not exceed the maximum operating angle of the scissor lift.
- Ensure a sufficient braking distance on smooth or unstable roads.
- Drivers who are not trained in how to use a scissor lift on slopes should never use it.
Comments