Pneumatic actuated valve manufacturer in India

Specialityvalve is growing Pneumatic actuated valve Manufacturer in India. Specialityvalve is one of the fastest-growing manufacturers of pneumatically operated valve It is a device that turns energy into mechanical motion for a pneumatic control valve (usually compressed air). This is determined by the type of actuator used. All of these products have a lot of power and speed, as well as a lot of durability. They also have a lot of functionality and dependability.

Pneumatic actuators valves have the advantage of providing high force and speed at a low unit cost in a small area. Most actuators use pneumatic cylinders, followed by hydraulic actuators.

Pneumatic actuator valves have the advantage of delivering high force and speed while maintaining a low unit cost and occupying a small footprint. In terms of force and speed per unit size, pneumatic cylinders outperform all other actuator technologies except hydraulic. The force and speed of pneumatic actuators can be easily adjusted, and they are independent of one another and of the manufacturer in India.

Advantage that has been demonstrated

The Specialityvalve actuator is a quarter-turn rack and pinion pneumatic actuator that doubles the torque of conventional pneumatic actuators. Superior performance is provided by a patented four piston design that generates torque around a centrally located piston. This translates to twice the power for the same size actuator or half the size for the same power.

The primary characteristics of a pneumatic actuator.

Balanced forces

Cube-shaped pistons with zero side loads allow each piston to provide a thrust along its own axis. As a result of this economical design, there is no need for guide rods or Because of this, seals are not subjected to as much stress as they would be if they were subjected to off-axis piston thrust

Superior corrosion resistance

To defend against corrosive atmospheres, the body and coverings are anodized both internally and externally. Anti-aggressive conditions can be further protected with an epoxy base-coat and a second polyurethane paint. 

Fast action

The 4-piston actuator's fast action is one of its most appealing qualities. The unusual four-piston design allows for a smaller diameter actuator pinion, resulting in a reduced response time.

Types of Pneumatic Actuated valve:

· Pneumatic Actuated Ball valve

· Pneumatic Actuated Gate valve

· Pneumatic Actuated Butterfly valve

· Pneumatic Actuated Knife Gate valve

Configuration of a Pneumatic Actuator:

·      4-20 Mamp

·      Pneumatic single acting actuators

·      Pneumatic double acting actuators

·      Pneumatic rotary actuators

·      Pneumatic Scotch and Yoke actuators

·      Pressure: 228 bar

Visit here for more details: https://www.specialityvalve.com/product-category/pneumatic-actuated-valves/