Middleeast Valve is a well reputed Gate valve supplier Oman. A valve that is used to start or stop the fluid flow in pipework is a gate valve. It is the most typical type of valve found in any process plant. It is a linear motion valve that controls when fluid flow starts or stops. These valves are either fully open or totally closed when in use. The valve disc is separated from the flow and provides almost little flow resistance when fully opened. As a result, the pressure drop that occurs when fluid passes through a gate valve is minimal.
They have controls that are operated by a threaded stem, wheels, and motors and come in a variety of designs. The only two possible operating states for gate valves are fully open and closed. Gate valves should not be used to control the temperature; rather, they should only be used to control the flow of water or gas. Compared to other types of valves, gate valves are typically more expensive, but they are also designed well and simple to operate.
· Parts:
- Hand wheel.
- Stuffing Box.
- Bonnet
- Gasket
- Stem
- Flange
- Disk
- Body seats
- Packing
- Body
· Types:
The different types of Gate Valves are-
- Rising Stem Gate Valve
- Non-Rising Stem Gate Valve
- Bellow Seal Gate Valve
- Pressure Seal Gate Valve
- Cryogenic Gate Valve
- Forged Gate Valve
- Knife Gate Valve
· Advantages
- They have low fluid resistance.
- They have superior sealing capability.
- They come with a wide application range.
- They have dual flow directions.
· Disadvantages
They open and close slowly.
They may be prone to scratches.
Assembly, start-up, and maintenance require large space.
· Industries which use them:
- Textiles.
- Power generation.
- Refineries.
- Petrochemical plants.
- Shipbuilding
- The chemical industry.
- Paper factories.
· Application:
Almost all fluid services, including air, fuel gas, feedwater, steam, lubricant oil, hydrocarbon, and nearly any other services, use gate valves. Gate valves are placed where they no longer remain open or closed because they typically take some time to transition between these two positions. Motorized gate valves are utilized when the valve must be controlled often or even remotely (i.e. equipped with an electric actuator).
· Description:
Middleeast Valve is a leading Gate valve supplier Oman. We ensure customer satisfaction. Our valves are made from superior quality materials and are available in various sizes and classes.
- Available materials: SS304, SS904, SS904L, SS316, Aluminium Bronze, Monel, Bronze, Brass, Duplex steel, Inconel, Incoloy, Titanium, WCB, CF8, CF8M, CF3, CF3M, WC1, WC6, WC9, Cast iron, SPUER DUPLEX
- Size: 1/2″- 64”
- Class: 150 to 2500
- Nominal Pressure: PN10 to PN450
- Operations: Hand Wheel Gate valve, Gear operated Gate valve, Electric actuated Gate valve and Pneumatic Actuated Gate valve
- Ends: Flanged(FF,RF,RTJ), Buttweld, Socket weld, Threaded
- Standards: API607, DIN, BS, ANSI, AWWA, ASME, API6D
- Visit our website: https://www.Middleeast Valvevalve.com/product-category/gate-valve/
Comments