SVR Global is a dominant and famous Dual plate check valve manufacturer in USA. When the fluid in the line reserve direction, the check valve allows flow in one direction and automatically prevents backflow. The clack valve or non-return valve is another name for a check valve.
These valves are manufactured with unblemished trim for years of trouble-free use. The Dual Plate Check Valve is used in clean water or air pipelines that run horizontally or vertically. This valve isn't designed to hold fluids that contain particles, such as waste or raw waste. This valve should not be used with fluids that contain hazardous gases. It is designed to produce flow in the direction indicated by the arrow on the surface plate, and to close quickly when flow reversal is detected. The plate will list the valve size, model number, working pressure, and construction materials.
What is Dual Plate check valve ?
Dual Plate check valves have a short-stroke, spring-assisted twin Disc action for increased dynamic behaviour that reacts fast to speed Rates. The valve has been enclosed for a fraction of a second, decreasing loud noise and lowering surge pressures to protect expensive pumping machinery from wind.
How does it work ?
A check valve depends on a compel differential to work. They require a higher tension on the information side of the valve than the yield side to open the valve. At the point when the pressing factor is higher on the power source side the valve will close. Contingent upon the valve type, the conclusion instrument is unique. In contrast to different valves, they needn't bother with a handle, switch, actuator, or human to accurately work.
Advantages of Dual Plate Check Valve:
• Acts as a backup system.
• Prevents backflow of water
• They can be used both horizontally and vertically and maintain pressure.
· To prevent the reverse flow of gas, fluid, and air just in of break down.
• It Maintains Pressure
• provides for complete and unhindered flow
Application of Dual Plate Check Valve
· Gas and Liquid Pipelines Industry
- Water and steam system
- Cooling towers
- Water Treatment
- Mine Dewatering
Why Choose us ?
SVR Global has been supplying valves for many years. We have dedicated marketing, sales, engineering, and quality-control teams to meet all of your valve requirements.
Material :
Body Material- Cast Iron check valve and Cast Steel Check Valve (LF2, A216, WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron Check Valve, Stainless Steel Check Valve [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F91), DUPLEX AND Super duplex STEEL [ F51, F53,F55 ] Forged Steel A105, A105N, F11, F22, F304, F316, F91] , Alloy20 , Hastelloy ALBR.
Size- ½” – 80”
Class-150 – 2500; PN10 – PN-450
Ends-Flanged, socket weld, butt weld
Visit us:- https://svrglobal.net/products/dual-plate-check-valve/
· Swing check valve
SVR Global is the foremost Swing Valve Manufacturer in USA. When the fluid in the line reserve direction, a swing valve allows flow in one direction while automatically preventing backflow. The clack valve or non-return valve is another name for a swing valve. Swing valves, like other check valves, are used to prevent backflow in the pipeline. Any reversal of flow can close the valve, which is opened by the pressure of the fluid travelling through the system. The swing check valve is a hinged clapper that swings or rotates around a supporting shaft and allows flow forces to manipulate the closure component.
HOW DOES IT WORK?
To allow flow in the forward direction, the disc swings away from the valve seat, then returns to the valve seat after the upstream flow is stopped, preventing backflow. One of the most frequent and best check valves for all-purpose use is the swing check design. These valves have the smallest pressure drop when compared to other check valves of the same size, and their internal contours and shapes allow them to fully open at low fluid velocities and create a swish flow route through the valve.
What are the advantages of Check Valve?
· It serves as a backup system.
• Prevents backflow of water
• They allow for total and unfettered flow and can be utilised both horizontally and vertically while maintaining pressure.
What are the Disadvantages of Check Valve?
• Butterfly Valve throttling is limited to low differential pressure; cavitation and blocked flow are two possible problems.
• Flow turbulence guides and influences the movement of the butterfly valve disc.
Features of Swing check Valve
• The bonnet/disc design allows for easy maintenance.
• The disc's lip waterproofing assures tightness • A light-weight disc requires minimal force to open and shut the valve • The disc can move slightly horizontally and vertically to close totally tight
WHY CHOOSE US?
SVR Global is one of the greatest Swing check valve manufacturer in USA and industry leader in flow-control solutions for all your valve need over the years.SVR Global offers a versatile manufacturing infrastructure that can handle a wide range of designs, sizes, pressure classes, and materials.
Body Material –Cast Steel( A216 WCB, WCC, LCB, LCC, WC6, WC9), WCB, SS304, 316L, Duplex Steel, 904L, Aluminium bronze , Stainless Steel [ SS316 , SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3,F55, F91 ]
Class – 150LB – 2500LB
Size – ½” – 40”
Ends – butt weld, socket weld, threaded, flanged
Visit us-
https://svrglobal.net/products/swing-check-valve/
Comments